Running Online Diagnostic Tests; Starting Online Diagnostic Tests; Displaying Online Diagnostic Tests And Test Results - Cisco WS-C3020 Software Configuration Manual

Catalyst blade switch for hp
Table of Contents

Advertisement

Chapter 41
Configuring Online Diagnostics
This example shows how to enable the generation of a syslog message when any health monitoring test
fails:
Switch(config)# diagnostic monitor syslog

Running Online Diagnostic Tests

After you configure online diagnostics, you can start diagnostic tests or display the test results. You can
also see which tests are configured for each switch and what diagnostic tests have already run.
These sections describe how to run online diagnostic tests after they have been configured:

Starting Online Diagnostic Tests

After you configure diagnostic tests to run on the switch or on individual switches, you can use start to
begin a diagnostic test.
Beginning in global configuration mode, use this command to start an online diagnostic test:
Command
diagnostic start test {test-id | test-id-range | all | basic |
non-disruptive}
This example shows how to start a diagnostic test on a specific switch:
Switch# diagnostic start test 1
Switch#
06:27:50: %DIAG-6-TEST_RUNNING: Running TestPortAsicStackPortLoopback{ID=1} ...
06:27:51: %DIAG-6-TEST_OK: TestPortAsicStackPortLoopback{ID=1} has completed
successfully
Switch#

Displaying Online Diagnostic Tests and Test Results

You can display the online diagnostic tests that are configured for specific switches and check the results
of the tests using the show commands.
To display the diagnostic tests that are configured for a switch and the test results, use these privileged
EXEC commands:
Table 41-1
show diagnostic Commands
Command
show diagnostic content
show diagnostic status
OL-8915-03
Starting Online Diagnostic Tests, page 41-3
Displaying Online Diagnostic Tests and Test Results, page 41-3
Purpose
Start a diagnostic test on a specific switch.
Purpose
Display the online diagnostics configured for a switch.
Display whether a switch is running a test.
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Running Online Diagnostic Tests
41-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3020

Table of Contents