Rscn Aggregation Enable - HP 5920 Series Command Reference Manual

Syntax
priority value
undo priority
Default
The switch priority is 128 in a VSAN.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Specifies the switch priority in the range of 1 to 254.
Usage guidelines
The priority value for FC switches is in the range of 1 to 254. The smaller the value, the higher the priority.
The FC switch with the highest priority will become the principal switch.
The priority is configured on a per-VSAN basis, and one FC switch can have different priorities in
different VSANs.
The priority configuration for the switch does not take effect until a disruptive reconfiguration is performed
by using the domain restart disruptive command.
Examples
# Configure the switch priority as 64 in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] priority 64
Related commands
domain restart

rscn aggregation enable

Use rscn aggregation enable to enable RSCN aggregation.
Use undo rscn aggregation enable to disable RSCN aggregation.
Syntax
rscn aggregation enable
undo rscn aggregation enable
Default
RSCN aggregation is disabled.
Views
VSAN view
Predefined user roles
network-admin
69