HP 5920 Series Command Reference Manual page 111

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name zoneset-name: Specifies a zone set by its name, a case-sensitive string of 1 to 64 characters. The
name can contain letters (uppercase and lowercase), numbers, and special characters (see
must start with a letter.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
If you specify both a zone set and a VSAN, this command displays information about the specified
zoneset in the specified VSAN.
If you specify only a VSAN, this command displays information about all zonesets in the specified
VSAN.
If you do not specify a zone set or a VSAN, this command displays information about all zone sets in all
VSANs.
Examples
# Display information about all zone sets in all VSANs.
<Sysname> display zoneset
VSAN 1:
zoneset name zs1
zone name z1
fcid 0x111111
fcid 0x222222
pwwn 11:11:11:11:22:22:22:22
zone name z2
fcid 0x111111
zone-alias name za1
fcid 0x111112
zoneset name zs2
zone name z1
VSAN 2:
VSAN 3:
zoneset name zs1
zone name z1
Table 35 Command output
Field
fcid
pwwn
Description
FC address of a zone member
pWWN of a zone member.
105
Table 29). It