HP 5920 Series Command Reference Manual page 37

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Admin Mode: auto - auto; E - e port; F - f port; NP - n port proxy
Oper Mode: E - e port; F - f port; NP - n port proxy;
TE - trunking e port; TF - trunking f port;
TNP - trunking n port proxy
Interface
VSAN Admin Admin Oper Oper
Mode
SAGG3
37
NP
Table 8 Command output
Field
Interface
VSAN
Admin Mode
Admin Trunk Mode
Oper Mode
Oper Speed
Status
# Display the descriptions of FC aggregate interfaces.
<sysname> display interface san-aggregation brief description
Brief information on SAN-Aggregation interface(s):
Status
Trunk Mode Speed
Mode
auto
NP
4G
UP
Description
Name of the FC aggregate interface.
Access VSAN of the FC aggregate interface.
User-configured FC aggregate interface mode:
auto.
E.
F.
NP.
User-configured trunk mode for the FC aggregate interface:
auto.
on.
off.
Negotiated mode (link layer negotiation) in which the FC aggregate
interface is operating:
E—The FC aggregate interface is operating in E mode as an access
port.
F—The FC aggregate interface is operating in F mode as an access
port.
NP—The FC aggregate interface is operating in NP mode as an
access port.
TE—The FC aggregate interface is operating in E mode as a trunk port.
TF—The FC aggregate interface is operating in F mode as a trunk port.
TNP—The FC aggregate interface is operating in NP mode as a trunk
port.
If no negotiation is initiated or negotiation fails, this field displays two
hyphens (--).
Negotiated rate in bps (physical layer negotiation) for the FC aggregate
interface.
If no negotiation is initiated or negotiation fails, this field displays two
hyphens (--).
Negotiated state (link layer negotiation) for the FC aggregate interface:
UP.
DOWN.
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 seriesFlexfabric 5930 series

Table of Contents