HP 5920 Series Command Reference Manual page 16

Field
aborts
deferred
collisions
late collisions
lost carrier
no carrier
# Display brief information about interface FC 1/0/1.
<Sysname> display interface fc 1/0/1 brief
Brief information on FC interface(s):
Admin Mode: auto - auto; E - e port; F - f port; NP - n port proxy
Oper Mode: E - e port; F - f port; NP - n port proxy;
TE - trunking e port; TF - trunking f port;
TNP - trunking n port proxy
Interface VSAN Admin Admin Oper Oper
Mode
Fc1/0/1 2 auto
Table 2 Command output
Field
Interface
VSAN
Admin Mode
Admin Trunk Mode
Description
Total number of frames that are not successfully sent for various reasons,
for example, collisions.
Number of frames that are delayed for transmission because collisions are
detected before they are sent.
Number of frames that the FC interface stopped transmitting because
collisions were detected during transmission.
Number of frames that the FC interface deferred to transmit after
transmitting their first 512 bits because of detected collisions.
Number of carrier losses during transmission. This counter increases by
one when a carrier is lost, and applies to serial WAN interfaces.
Number of times that the FC interface failed to detect the carrier when
attempting to send frames. This counter increases by one each time the FC
interface failed to detect the carrier, and applies to serial WAN
interfaces.
Status SAN-Aggregation
Trunk Mode Speed
Mode
off E 4G UP
Description
Name of the FC interface.
Access VSAN of the FC interface.
User-configured FC interface mode:
•
auto.
•
E.
•
F.
•
NP.
User-configured trunk mode for the FC interface:
•
auto.
•
on.
•
off.
10
SAGG23