HP 5920 Series Command Reference Manual page 30

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Field
Oper Mode
Status
Bind Interface
# Display the descriptions of VFC interfaces.
<sysname> display interface vfc brief description
Brief information on VFC interface(s):
Interface
Description
Vfc1
Vfc1 Interface
Vfc2
Vfc2 Interface
# Display information about and the causes of the VFC interfaces in physically down state.
<Sysname> display interface vfc brief down
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
Vfc1
Table 6 Command output
Field
Brief information on interface(s)
under bridge mode
Link: ADM - administratively
down; Stby - standby
Interface
Link
Description
Negotiated mode (link layer negotiation) in which the VFC interface is
operating:
E—The VFC interface is operating in E mode as an access port.
F—The VFC interface is operating in F mode as an access port.
NP—The VFC interface is operating in NP mode as an access port.
TE—The VFC interface is operating in E mode as a trunk port.
TF—The VFC interface is operating in F mode as a trunk port.
TNP—The VFC interface is operating in NP mode as a trunk port.
If no negotiation is initiated or negotiation fails, this field displays two
hyphens (--).
Negotiated state (link layer negotiation) for the VFC interface:
UP.
DOWN.
Ethernet interface and FCoE MAC address bound to the VFC interface.
This field is empty when the VFC interface does not have bound Ethernet
interface and FCoE MAC address.
Link Cause
ADM
Administratively
Description
Brief information about Layer 2 interfaces.
ADM—The interface has been shut down by the network administrator.
To bring up the interface, execute the undo shutdown command.
Stby—The interface is a standby interface.
Interface name.
Physical link state of the interface:
UP—The interface is physically up.
DOWN—The interface is physically down.
ADM—The interface has been administratively shut down. To bring up
the interface, execute the undo shutdown command.
Stby—The interface is a standby interface.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 seriesFlexfabric 5930 series

Table of Contents