Parameters
value: Specifies the distributed service timeout period in the range of 5000 to 10000 milliseconds.
Usage guidelines
The distributed service timeout period can be configured in system view or VSAN view.
•
The configuration in system view takes effect on all VSANs. The configuration in VSAN view takes
effect only on the current VSAN.
If you configure the distributed service timeout period both globally and for a VSAN, the
•
configuration for the VSAN is given priority.
Examples
# Set the global distributed service timeout period to 6000 milliseconds.
<Sysname> system-view
[Sysname] fc timer distributed-services 6000
Related commands
timer distributed-services
fc timer error-detect
Use fc timer error-detect to specify the global error detection timeout period.
Use undo fc timer error-detect to restore the default.
Syntax
fc timer error-detect value
undo fc timer error-detect
Default
The global error detection timeout period is 2000 milliseconds.
Views
System view
Predefined user roles
network-admin
Parameters
value: Specifies the error detection timeout period in the range of 1000 to 10000 milliseconds.
Usage guidelines
The error detection timeout period can be configured in system view or VSAN view.
The configuration in system view takes effect on all VSANs. The configuration in VSAN view takes
•
effect only on the current VSAN.
If you configure the error detection timeout period both globally and for a VSAN, the configuration
•
for the VSAN is given priority.
Examples
# Set the global error detection timeout period to 6000 milliseconds.
<Sysname> system-view
[Sysname] fc timer error-detect 6000
66