Display Zone-Alias - HP 5920 Series Command Reference Manual

Field
Mode
Default zone
Distribute
Hard-zoning
Full Zoning Database
Status
Related commands
zone default-zone permit
•
• zoneset distribute full

display zone-alias

Use display zone-alias to display zone alias information.
Syntax
display zone-alias [ [ name zone-alias-name ] vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name zone-alias-name: Specifies a zone alias by its name, a case-sensitive string of 1 to 64 characters.
The name can contain letters (uppercase and lowercase), numbers, and special characters (see
29). It must start with a letter.
Description
Zoning mode: basic or enhanced.
Default zone policy:
•
deny—Deny members in the default zone from accessing each other.
•
permit—Allow members in the default zone to access each other.
Distribution and merge type:
•
active only—Incomplete distribution and merge.
•
full—Complete distribution and merge.
In enhanced zoning mode, zone distribution and merge are not affected by the
distribution and merge type. The distribution and merge type is not displayed
for the enhanced zoning mode.
Indicates whether hard zoning is enabled or disabled:
•
enabled—Hard zoning is in effect.
•
disabled (Administratively)—Hard zoning is not in effect because it is
manually disabled.
•
disabled (No enough hardware resource)—Hard zoning is not in effect
because hardware resources are insufficient.
Zone database information, including the numbers of zone sets, zones, and
zone aliases in a VSAN.
Zoning status:
•
merging—Zone merge is in progress.
•
distributing—Zone distribution is in progress.
•
Free—Neither zone merge nor zone distribution is in progress.
103
Table