Korg KROSS Operation Manual page 66

Sequencer
4. Press the MENU (OK) button to load the template
song, or press the FUNCTION (CANCEL) button if
you decide to cancel.
When you perform this operation, song settings other
than Track Play Loop will be copied.
5. In the "From" field, select the pattern that you want
to copy.
To actually hear the currently selected pattern, press the
SEQUENCER
In the To Track field, select the copy-destination track.
In the Measure field, specify the starting measure of the
copy-destination.
Following the pattern name for each of the 700 preset
patterns, the musical style and the name of the most
suitable Drum category program are partially displayed.
By loading a drum track and the corresponding preset
pattern, you can instantly set up a drum track appropriate
for each preset template song.
6. To execute this operation, press the MENU (COPY)
button.
When you execute this procedure, the Measure field will
count up automatically, showing how many measures of
the selected pattern have been placed in the selected song.
You can then copy another pattern if desired, or add more
measures of the same pattern. When you're finished,
press the FUNCTION (EXIT) button.
Copying the settings of a combination or
program
You can copy the settings of a combination or program into
the sequencer.
This can be done in the following ways.
• Auto Song Setup
Auto Song Setup is a function that copies the settings of the
selected combination (in Combination mode) or program
(in Program mode) to the song in Sequencer mode.
• Copy From Combination or Copy From Program
functions. (see pages 138, 139 of the Parameter Guide)
In Sequencer mode, you can use these functions to copy
the desired settings.
Auto Song Setup function
1. Enter Combination mode.
2. In COMBI> MAIN page, select the desired
combination and edit the Arpeggiator etc. as desired.
Note: If you want to save the edited state of the
combination, use the Write Combination functions.
3. Press the SEQUENCER
Alternatively, select the "Auto Song Setup" function.
The Setup to Record dialog box will appear.
60
(start/stop) button.
(REC) button.
4. To execute the Auto Song Setup function, press the
SEQUENCER (REC) button or the MENU (OK)
button. If you decide not to execute, press the
CANCEL button.
You will automatically move to Sequencer mode, and the
settings of the combination will be copied to the song.
The step sequencer's RUN on/off setting and the Drum
Track's on/off setting when Trigger Mode is set to
"Start Immediately" will not be copied. If you want to
use these settings, press the appropriate buttons to turn
them on.
The first unused song will be the copy-destination song.
5. The KROSS will automatically enter record-ready
mode, and the metronome will sound according to the
Metronome setting. (see page 110 of the Parameter
Guide)
6. Press the SEQUENCER
begin realtime recording. To stop recording, press the
SEQUENCER (start/stop) button once again.
Copy From Combination and Copy From Program
functions
In Sequencer mode, you can use these functions to copy
combination or program settings to a song.
If you select all of the check boxes in the dialog box, the
same settings will be copied.
Creating a new song
1. Press the SEQ button. You'll enter Sequencer mode.
2. Press the FUNCTION button, choose the Create New
Song function from the menu, and press the MENU
(OK) button (SEQ> MAIN page, etc.). A dialog box
will appear.
3. Enter the number of measures in Set Length.
You can change the number of measures later if
necessary. (see "Set Song Length" on page 142 of the
Parameter Guide)
4. If you add a check mark to "Select the number,"
you'll be able to specify the number of the new song. If
there is no check mark, the song will be numbered
consecutively.
5. Press the MENU (OK) button to create the song.
(start/stop) button to