Korg KROSS Operation Manual page 143

Memory Protected
Meaning: The internal program, combination, song, drum
kit, user arpeggio pattern is protected.
• In Global/Media mode, turn off write-protect, and
execute the write or load procedure once again.
MIDI data receiving error
Meaning: While receiving MIDI System Exclusive data, the
format of the received data was invalid, for example,
because the size of the data was incorrect.
N
No data
Meaning: When loading a Standard MIDI File, the file
contained no events.
No media
Meaning: When using the audio recorder or when executing
a Global/Media mode command, the target SD card was not
inserted.
• Insert SD card, and navigate to an appropriate directory
that the KROSS will recognize.
No recording track specified
Meaning: When performing realtime multi-track recording,
you attempted to begin recording with no tracks set to REC.
To solve this problem:
• Set the desired tracks for recording to REC.
No space available on media
Meaning: When saving or exporting a file, there was
insufficient space on the media.
• Either delete an existing file, or replace the media with
another that contains sufficient free space.
No updating was required at this time. The KROSS already
has the latest version of the system files.
Meaning: When executing the Global/Media mode Update
System Software function, the update was not necessary
because the system is already the most recent version.
Not enough memory
Meaning: When starting realtime recording in Sequencer
mode, the minimum amount of free memory (such as
memory for the BAR events up to the recording start
location) could not be allocated. To solve this problem:
• Delete other song data etc. to regain free memory.
Not enough memory to load
Meaning: When you attempted to load a .SNG file or a
standard MIDI file in Media mode, there was insufficient
free memory in the sequence memory. To solve this
problem:
• Delete other song data etc. to regain free memory.
Not enough sample memory
Meaning: There is insufficient sample memory (for the
sample parameters or sample waveform data).
• Delete some samples to increase the amount of free
memory.
• In the Media mode EX-PCM page, uninstall installed
option titles or user sample data.
Messages Error and confirmation messages
Not enough session locations available
Meaning: When executing Create New Session, there is
insufficient session memory. (The number of sessions has
exceeded the maximum of 200.)
• Execute the function in a way that overwrites an
unneeded session.
Not enough song locations available
Meaning: When loading a .SNG file with Append
specified, you attempted to load more songs than can be
loaded.
• In Sequencer mode, execute Delete Song to increase the
number of songs that can be used, and then load the song
again.
NOTICE: Overdubbing with this Level setting will
attenuate the sections of previous takes by the same
amount. Use ADJ.LVL to adjust the Audio Song and avoid
uneven audio levels.
Meaning: This message is shown if the audio recorder Set
Play Level function is set to a value other than 0 dB.
• With this Level setting, if you overdub a region of the
song while playing back the previous take, the volume of
the previous take will be lowered only for the recorded
region. To avoid this problem of lowered volume, use
ADJ. LVL to adjust the audio song level.
Now writing into internal memory
Meaning: Now writing to internal memory. Never turn off
the power while this message is shown. Doing so may cause
internal data to be damaged.
R
Root directory is full
Meaning: When attempting to create a file or directory at
the root level of the media, you exceeded the maximum
number of files or folder that could be created in the root
directory of that media.
• Delete unneeded files from the root level of the media.
S
Sample length is shorter than minimum
Meaning: When using the pad sampler function, you
attempted to execute an edit that would have caused the
sample data length to be shorter than 8 samples.
• Specify the edit region etc. so that the sample data length
is 8 samples or longer.
Scanning media
Meaning: Now checking the contents of the SD card. Do not
remove the card while this message is shown.
Source audio song setting is empty
Meaning: When using the pad audio play function, and
executing Insert or Paste, the copy-source audio song
settings were empty.
• Execute the Copy command before you execute Insert or
Paste.
137