Saving Your Midi Song - Korg KROSS Operation Manual

Saving your MIDI song

In order to ensure that the data you create is reproduced
faithfully, we recommend that you save your data by using
the Save All command so that the programs will also be
saved. However if you have not changed the program
numbers or sounds used in your song, saving only the song-
related data (.SNG) will minimize the size of the data.
When you turn off the power, the Sequencer mode
settings and the recorded songs data will be lost.
1. Insert an SD card in the SD card slot.
With the card label facing upward, insert the connector
end of the card into the SD card slot and press it in until
you hear a click.
Make sure that the card is oriented correctly when you
insert it. Forcing it in the wrong direction may damage
the slot or the card, and the data may be lost.
2. Hold down the EXIT button (
SEQ button ( ) to enter Global/Media mode.
3. Press the MENU button and select the MEDIA tab;
the MEDIA>FILE page appears.
Tip: When the Global/Media mode GLOBAL tab is
displayed, you can once again hold down the EXIT
button ( ) and press the SEQ button (
jump to the MEDIA tab.
4. Press the FUNCTION button. Press the PAGE– or
PAGE+ buttons to choose Save All.
5. Press the MENU (OK) button.
The Save All (PCG and SNG) dialog box will appear. If
you want to change the name, you can do so. (see
page 124)
6. Press the MENU (OK) button to save (write) the data.
If data of the same name already exists, a message will
ask whether you want to overwrite the existing data. If
you want to overwrite the existing data, press the MENU
(OK) button.
Saving a template song
If there are sounds or settings that you use frequently for
songs, it's convenient to save them as a template song.
Use the Save Template Song function to do this.
Note: The saved data will contain settings for the programs
that are selected for the song, as well as the track parameters,
effect settings, and arpeggiator settings.
) and press the
) to
Saving your MIDI song Tracks
65