Drum Track Function Settings; Drum Track Function Settings In Program Mode; Drum Track Function Settings In Combination Mode - Korg KROSS Operation Manual

Drum Track function settings

Drum Track function settings in
Program mode
Starting/stopping the drum track
1. Access the Program Mode P-DRUM
TRACK>PATTERN page.
2. "Trigger Mode" specifies how the Drum Track
pattern will be triggered.
Start Immediately: When you press the DRUM TRACK
button to turn it on, the LED will light up and the Drum
Track pattern will start according to the Sync setting. It
will stop when you press the DRUM TRACK button to
turn it off.
Wait KBD Trigger: When you press the DRUM
TRACK button to turn it on, the LED will blink and the
Drum Track pattern will wait to start. When you play the
keyboard or receive a MIDI note-on, the Drum Track
pattern will start according to the Sync setting.
3. Specify the Sync setting.
Off (unchecked): The Drum Track pattern will not
synchronize to the arpeggiator that's currently running,
but will start immediately.
On (checked): The Drum Track pattern will synchronize
to the arpeggiator that's currently running.
4. If "Trigger Mode" is set to Wait KBD Trigger, specify
the "Latch" setting. "Latch" specifies whether the
Drum Track pattern will continue playing even after
you take your hand off the keyboard.
Off (unchecked): If the DRUM TRACK button is on
(the LED will blink), the pattern will start when you play
the keyboard (note-on). The pattern will stop when you
release the keyboard (note-off).
On (checked): If the DRUM TRACK button is on (the
LED will blink), the pattern will start when you play the
keyboard (note-on). The pattern will continue when you
release the keyboard (note-off). The pattern will stop
when you turn the DRUM TRACK button off (the LED
will go dark).
5. If "Trigger Mode" is set to Wait KBD Trigger, specify
the Keyboard Zone and Velocity Zone.
These settings specify the range of keys and velocities
that will trigger the Drum Track pattern when you play
the keyboard (or receive a note-on).
Saving the on/off status
If "Trigger Mode" is set to Wait KBD Trigger, the drum
track's on/off status can be saved in the program.
If "Trigger Mode" is set to Start Immediately, the drum
track's on/off status will always be saved as "off," regardless
of the state of the DRUM TRACK button.
Drum Track function settings Drum Track function settings in Program mode
MIDI transmission and reception for the
drum track
In Program mode, the Drum Track function transmits and
receives on the following MIDI channels.
Receive: If you're controlling the triggering by playing the
keyboard, the drum track will receive on the global MIDI
channel.
Transmit: The drum track will transmit on the MIDI
channel that's specified by the Drum Track Prog MIDI Ch
(default: channel 10) which can be found on the G-MIDI>
OUT page. (Note data etc. of the Drum Track program will
be transmitted.)
Note: MIDI transmission of the pattern data is enabled if
Drum Track Prog MIDI Out is selected. The default setting
is off (unselected).
The Drum Track program does not transmit or receive
program changes.
Drum Track function settings in
Combination mode
MIDI transmission and reception for the
drum track
In Combination mode, the Drum Track function transmits
and receives on the following MIDI channels.
Receive: If you're controlling the triggering by playing the
keyboard, the drum track will receive on the global MIDI
channel.
Transmit: The drum track will transmit on the MIDI
channel that's specified by the Output (C-DRUM TRACK>
CHANNEL) setting of each combination.
Set this to match the MIDI channel of the timbre you've
specified for the drum program.
If the timbre's Status (COMBI> PROG) is EXT or EX2, the
note data etc. of the Drum Track pattern will be transmitted.
85