Saving To Sd Card - Korg KROSS Operation Manual

Text Target
SHIFT button
Switch
between
uppercase,
Move the cursor
lowercase,
numerals, and left/right
symbols
Hold down the SHIFT button
INSERT button DELETE button
Press the ENTER button Delete the
to insert a character at character at the
the left of the cursor cursor position
Cursor Characters
OK button
Press the OK button to
confirm the text you
entered, or press the EXIT
button to discard your
changes and quit editing
SPACE button
Insert a space at the
cursor position

Saving to SD card

For details on the data that can be saved on SD card, please
see "Data used by the KROSS" on page 119.
The musical data of a song that you create in Sequencer
mode cannot be saved in the KROSS's internal memory.
You must save this data on a commercially available SD
card, or save it using MIDI data dump. When you've
come up with settings you like, it's a good idea to save
them, so that even if you subsequently edit those
settings, you'll always be able to reload the previous
settings if desired.
For details on the SD cards that can be used, and on how to
insert or remove the SD card in the card slot, please see
"Using an SD card" on page 25.
How to save data
Access the MEDIA> FILE page, and use a function
command to select the data that will be saved on the SD
card.
As an example here, we'll execute Save All to save the .PCG
and .SNG files.
"Save All" saves all internal memory Programs,
Combinations, Favorites data, Global settings, Drum Kits,
and User Arpeggio Patterns to media as a .PCG file. It also
saves songs as a .SNG file.
This method is available only if the current directory is
a DOS directory. Press the cursor button ◄ to move
between levels.
1. Make sure that the SD card is in a state that allows
saving. (see "Inserting/removing an SD card" on
page 25)
2. Access the MEDIA> FILE page.
Hold down the EXIT button (
SEQ button ( ). Use the PAGE+ and PAGE-
buttons to access the MEDIA>FILE page.
Note: If the contents of another file are shown, press the
cursor button ◄.
3. Press the FUNCTION button to access the menu, use
the PAGE– (▲) or PAGE+ (▼) buttons to select Save
All, and then press the MENU (OK) button.
A dialog box will appear.
4. Press the text edit button and input a filename for the
file you want to save. (see "Editing names")
5. Press the MENU (OK) button to execute the save
function.
The data will be saved on the SD card, and you will
return to the Save page.
The display will show the file that was saved.
The various types of data are saved as the following files.
• .PCG file
• .SNG file
Saving data Saving to SD card
) and press the
125