Loading Data; Data That Can Be Loaded; Loading Data From Sd Card - Korg KROSS Operation Manual

Overall settings for the KROSS, and saving/loading data
Cautions when saving
If an identically named file exists on the SD cared
If a file with the same name already exists on the SD card,
you will be asked whether you want to overwrite that data. If
you wish to overwrite, press the MENU (OK) button. If you
want to save without overwriting, press the FUNCTION
(CANCEL) button and rename the file before you save it.
For details, please see page 124.
126

Loading data

Data that can be loaded

Loading from SD card
You can load the following data from SD card.
• PCG files:
Programs, combinations, drum kits, global settings,
favorites data, user arpeggio patterns
• .SNG file:
Song
• .MID file:
Standard MIDI file (SMF) format
• WAV files:
Import into the audio recorder (44.1 kHz/48 kHz, 16-bit,
stereo files)
Note: For details on the SD cards that can be used, please
see page 25.
Loading the preloaded data and demo songs
You can load the factory settings and demo songs back into
the KROSS's internal memory. For the procedure, please see
"Loading the preloaded data" on page 129.

Loading data from SD card

Loading all Programs, Combinations, Drum
Kits and Arpeggio patterns
Here we'll explain how to load all data from a .PCG file
containing Programs, Combinations, Drum kits, Global
settings, and User Arpeggio patterns in a single operation.
Before loading this data, make sure that the Global/
Media mode Memory Protect check box is cleared. (see
"Protecting the memory" on page 116)
1. Make sure that the SD card is in a state that allows
loading. (see "Inserting/removing an SD card" on
page 25)
2. Access the MEDIA> FILE page.
Hold down the EXIT button (
SEQ button ( ). Use the PAGE+ and PAGE-
buttons to access the MEDIA>FILE page.
3. Use the cursor buttons ▲▼ to select the .PCG file
that contains the program or combination data that
you want to load.
Note: The .PCG files and .SNG files are at the top level.
If you don't see them, press the cursor button ◄ to
change levels. (see "Files and data structures that the
KROSS can recognize" on page 120)
) and press the