Table of Contents
Advertisement
•
Switch A will forward the multicast data intended for multicast group 224.1.1.1 only to Router C.
•
Switch A will forward the multicast data intended for multicast group 225.1.1.1 only to Router D.
Troubleshooting PIM snooping
PIM snooping does not work on a Layer 2 device
Symptom
PIM snooping does not work on a Layer 2 device.
Solution
To resolve the problem:
1.
Use the display current-configuration command to display information about IGMP snooping
and PIM snooping.
2.
If IGMP snooping is not enabled, enable IGMP snooping globally, and then enable IGMP
snooping and PIM snooping for the VLAN or VSI.
3.
If PIM snooping is not enabled, enable PIM snooping for the VLAN or VSI.
4.
If the problem persists, contact Hewlett Packard Enterprise Support.
62
Advertisement
Table of Contents
Troubleshooting
