Displaying And Maintaining Ipv6 Multicast Vlans; Ipv6 Multicast Vlan Configuration Examples; Sub-Vlan-Based Ipv6 Multicast Vlan Configuration Example - HP FlexFabric 5950 series Configuration Manual

Displaying and maintaining IPv6 multicast VLANs

Execute display commands in any view and reset commands in user view.
Task
Display information about IPv6
multicast VLANs.
Display information about information
about IPv6 multicast group entries in
IPv6 multicast VLANs.
Display IPv6 multicast VLAN
forwarding entries.
Clear IPv6 multicast group entries in
IPv6 multicast VLANs.

IPv6 multicast VLAN configuration examples

Sub-VLAN-based IPv6 multicast VLAN configuration
example
Network requirements
As shown in
•
Layer 3 device Switch A runs MLD and acts as the MLD querier. Layer 2 device Switch B runs
MLDv1 snooping.
•
The IPv6 multicast source sends IPv6 multicast data to IPv6 multicast group FF1E::101.
Receivers Host A, Host B, and Host C belong to VLAN 2, VLAN 3, and VLAN 4, respectively.
Configure a sub-VLAN-based IPv6 multicast VLAN on Switch B to meet the following requirements:
•
Switch A sends the IPv6 multicast data to Switch B through the IPv6 multicast VLAN.
•
Switch B forwards the IPv6 multicast data to the receivers in different user VLANs.
Figure 100:
Command
display ipv6 multicast-vlan [ vlan-id ]
display ipv6 multicast-vlan group [ ipv6-source-address
| ipv6-group-address | slot slot-number | verbose | vlan vlan-id ] *
display ipv6 multicast-vlan forwarding-table
[ ipv6-source-address [ prefix-length ]
| ipv6-group-address [ prefix-length ] | slot slot-number
| subvlan vlan-id | vlan vlan-id ] *
reset ipv6 multicast-vlan group [ ipv6-group-address
[ prefix-length ] | ipv6-source-address [ prefix-length ] | vlan vlan-id ]
*
340