Pro-Form 450 LE User Manual page 7

3. Remove the indicated screw (A) and the ship-
ping bracket (B) from the Base (1). Discard the
screw and the shipping bracket.
Next, tighten the Base Foot (26) into the
Base (1).
4. Orient the Rear Stabilizer (7) as indicated by the
sticker. Attach the Rear Stabilizer to the Frame
(2) with two M10 x 127mm Screws (83).
Next, hold the handle (C) on the Frame (2),
press the Latch (68), and lower the Frame until
the Rear Stabilizer (7) rests on the floor.
3
B
A
4
83
2
68
7
1
26
7
C