Volume Controls For The Headset Microphone; Making And Receiving Calls Using A Headset; Using Intercom Functionality; Using The Icom Key - Mitel 6940 User Manual

Contact your telephone equipment retailer or distributor to purchase a compatible headset.
Notes:
1. Customers should read and observe all safety recommendations contained in
headset operating guides when using any headset.
2. Contact your System Administrator for questions regarding supported headsets.

Volume Controls for the Headset Microphone

On the 6940, there are three options for the headset microphone volume: Low, Medium, and High.
For information about configuring the headset microphone volume, see

Making and Receiving Calls Using a Headset

1. Ensure that you have selected a headset audio mode (see
the IP Phone UI"
2. If you have a USB headset, insert the USB plug into the USB port
Phone Installation Guide for more information)
or
Pair and connect your Bluetooth headset (see
3. Press the
audio mode selected from the Options List, a dial tone or an incoming call is received on either
the headset or the handsfree speakerphone.
4. Press the

Using Intercom Functionality

On the 6940 you can use the Icom key to automatically connect with a remote extension.

Using the Icom Key

1. Press the Icom key.
2. If no number was defined when configuring the key, enter the extension number of the person
you want to intercom.
3. After a beep tone, your phone automatically connects with the remote extension and you can
speak through its speaker.
4. To cancel the intercom, press
5. When you are finished speaking, hang up the phone by placing the handset back on-hook or
by pressing
up, the remote phone also hangs up.
on page lxxix.
key to obtain a dial tone or to answer an incoming call. Depending on the
key to end the call.
or the Cancel key.
or the line/call appearance button for the active call. When you hang
"Headset"
"Configuring the Audio Mode Using
see the Mitel 6940 SIP IP
(
"Bluetooth" on page lxv).
Making Calls
.
on page lxxx
cxxxix