Configuring Dnd Modes Using The Ip Phone Ui - Mitel 6940 User Manual

Mitel 6940 SIP Phone User Guide
The user can select a specific account for DND, turn DND on for all accounts, or turn DND off
for all accounts.
Notes:
1. If there is only one account configured on the phone, then the mode setting is
2. Using the Mitel Web UI, if you change the DND Key Mode to Phone, all accounts
3. Click Save Settings.
The changes takes affect immediately without a reboot.
4. Click on Basic Settings > Account Configuration.
5. For each account, enable DND by placing a check mark in the box. Disable DND by unchecking
the box.
Notes:
1. If you selected Account or Custom mode in Step 2, you can enable/disable each
2. Number and name of accounts that display to this screen are dependent on the
6. Click Save Settings.
The changes takes affect immediately without a reboot.

Configuring DND Modes Using the IP Phone UI

After you add a DND key to your phone, you can toggle the DND state using this key on the phone.
Use the following procedure to enable/disable DND on the IP phone.
The following procedures assume you have already configured a DND key AND assumes there are
multiple accounts configured on the phone.
clxxxvi
ignored and the phone behaves as if the mode was set to Phone.
synchronize to the current setting of Account 1.
account or all accounts as applicable. If you selected Phone mode, the first
account allows you to change the DND status for all accounts.
number and name of accounts configured on the phone. Only your Administrator
can create accounts for your phone. Contact your Administrator for more
information.