Speed Dial/Xfer Key Requirements And Functionality; Configuring A Speed Dial/Xfer Key Using The Mitel Web Ui - Mitel 6940 User Manual

The Speed Dial/Xfer key combines the Speed Dial and Transfer keys' functionality together
allowing the user to transfer calls or speed dial with one key.
Note: It is recommended that you enable the Switch UI Focus to Ringing Line
parameter when using the Speed Dial/Xfer feature. For more information about this
parameter, see "Switch UI Focus to Ringing Line"

Speed Dial/Xfer Key Requirements and Functionality

The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer
key causes the phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get
the call back) by pressing the line key again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed
Dial/Xfer key forwards the call to the predefined extension.

Configuring a Speed Dial/Xfer Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Speed Dial/Xfer.
4. In the Label field, enter a label for the Speed Dial/Xfer key.
5. In the Value field, enter the speed dial extension or the extension to transfer calls to (for example,
3600).
6. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
Configuring Softkeys
on page ccvii.
cxix