Configuring An Intercom Key Using The Mitel Web Ui; Phone Lock Key - Mitel 6940 User Manual

Mitel 6940 SIP Phone User Guide

Configuring an Intercom Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Icom.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the predefined number you wish to be dialed when the Intercom key is
pressed.
Note: If no value is defined, you will need to manually enter a number after pressing
the Intercom key.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84 (M695).
8. In the Type field, select Icom.
9. In the Value field, enter the predefined number you wish to be dialed when the Intercom key is
pressed.
Note: If no value is defined, you will need to manually enter a number after pressing
the Intercom key.
10. Click Save Settings.

Phone Lock Key

You can configure a key on the IP phone to use as a lock/unlock key. You assign the function of the
key as Phone Lock.
cxxx