Leds; Chapter 18 Leds; Overview; What You Can Do In This Chapter - ZyXEL Communications NWA1123-ACv2 User Manual

18.1 Overview

The LEDs of your NWA/WAC can be controlled such that they stay lit (ON) or OFF after the NWA/WAC is
ready. There are two features that control the LEDs of your NWA/WAC - Locator and Suppression.

18.1.1 What You Can Do in this Chapter

• The Suppression screen
behave after the device is ready.
• The Locator screen
WAC between several devices in the network.

18.2 Suppression Screen

The LED Suppression feature allows you to control how the LEDs of your NWA/WAC behave after it's
ready. The default LED suppression setting of your AP is different depending on your NWA/WAC model.
You can go to the Maintenance > LEDs > Suppression screen to see the default LED behavior and
change the LED suppression setting. After you make changes in the suppression screen, it will be stored
as the default when the NWA/WAC is restarted. See
values for different models.
Note: When the
the setting in LED suppression.
To access this screen, click Maintenance > LEDs > Suppression.
Figure 123 Maintenance > LEDs > Suppression
(Section 18.2 on page
(Section 18.3 on page
NWA/WAC is booting or performing firmware upgrade
NWA / WAC Series User's Guide
C
H A P T E R
198)) allows you to set how you want the LEDs to
199) allows users to see the actual location of the NWA/
(Section 1.6 on page
198
18

LEDs

25) for information on default
, the LEDs will lit regardless of