Add/Edit Layer-2 Isolation Profile - ZyXEL Communications NWA1123-ACv2 User Manual

MAC addresses that are not listed in the layer-2 isolation table are blocked from communicating with
the NWA/WAC's wireless clients except for broadcast packets. Layer-2 isolation does not check the
traffic between wireless clients that are associated with the same AP. Intra-BSS traffic allows wireless
clients associated with the same AP to communicate with each other.
This screen allows you to specify devices you want the users on your wireless networks to access. To
access this screen click Configuration > Object > AP Profile > SSID > Layer-2 Isolation List.
Figure 77 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List
The following table describes the labels in this screen.
Table 57 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List
LABEL
Add
Edit
Remove
Object
Reference
#
Profile Name

10.6.1 Add/Edit Layer-2 Isolation Profile

This screen allows you to create a new layer-2 isolation profile or edit an existing one. To access this
screen, click the Add button or select a layer-2 isolation profile from the list and click the Edit button.
Note: You need to know the MAC address of each wireless client, AP, computer or router that
you want to allow to communicate with the NWA/WAC's wireless clients.
Chapter 10 AP Profile
DESCRIPTION
Click this to add a new MAC filtering profile.
Click this to edit the selected MAC filtering profile.
Click this to remove the selected MAC filtering profile.
Click this to view which other objects are linked to the selected MAC filtering profile (for
example, SSID profile).
This field is a sequential value, and it is not associated with a specific user.
This field indicates the name assigned to the layer-2 isolation profile.
NWA / WAC Series User's Guide
124