Https Example - ZyXEL Communications NWA1123-ACv2 User Manual

Figure 96 Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 73 Configuration > System > WWW > Service Control
LABEL
HTTPS
Enable
Server Port
Authenticate Client
Certificates
Server Certificate
Redirect HTTP to HTTPS
HTTP
Enable
Server Port
Apply
Reset

14.4.5 HTTPS Example

If you haven't changed the default HTTPS port on the NWA/WAC, then in your browser enter "https://
NWA/WAC IP Address/" as the web site address where "NWA/WAC IP Address" is the IP address or
domain name of the NWA/WAC you wish to access.
Chapter 14 System
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that matches
the IP address(es) in the Service Control table to access the NWA/WAC Web Configurator
using secure HTTPs connections.
The HTTPS server listens on port 443 by default. If you change the HTTPS server port to a
different number on the NWA/WAC, for example 8443, then you must notify people who
need to access the NWA/WAC Web Configurator to use "https://NWA/WAC IP
Address:8443" as the URL.
Select Authenticate Client Certificates (optional) to require the SSL client to authenticate
itself to the NWA/WAC by sending the NWA/WAC a certificate. To do that the SSL client
must have a CA-signed certificate from a CA that has been imported as a trusted CA on
the NWA/WAC.
Select a certificate the HTTPS server (the NWA/WAC) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the My Certificates screen.
To allow only secure Web Configurator access, select this to redirect all HTTP connection
requests to the HTTPS server.
Select the check box to allow or disallow the computer with the IP address that matches
the IP address(es) in the Service Control table to access the NWA/WAC Web Configurator
using HTTP connections.
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service to access the NWA/WAC.
Click Apply to save your changes back to the NWA/WAC.
Click Reset to return the screen to its last-saved settings.
NWA / WAC Series User's Guide
155