Wac5302D-S - ZyXEL Communications NWA1123-ACv2 User Manual

Table 11 NWA1123/5120 Series LED (continued)
COLOR
Amber
Green
Amber
Green
Amber
Green
Amber
Green
Amber
Green
Amber
Green
Amber
Green

1.6.5 WAC5302D-S

The LEDs automatically turn off when the WAC5302D-S is ready. You can press the LED ON button for one
second to turn on the LEDs again. The LEDs will blink and turn off after two minutes.
Figure 9 WAC5302D-S LEDs
Chapter 1 Introduction
STATUS DESCRIPTION
Off The NWA is ready for use.
On
Off The NWA's wireless interface is activated.
On
Slow Blinking (blink for 3 The NWA is discovering an AP controller.
times, Off for 3s)
On
On The NWA failed to boot up or is experience system failure.
Off
Fast Blinking (On for The NWA is undergoing firmware upgrade.
50ms, Off for 50ms)
Off
Slow Blinking (blink for 3 The Uplink port is disconnected.
times, Off for 3s)
Off
Slow Blinking (blink for 2 The wireless LAN is disabled or fails.
times, Off for 3s)
Off
NWA / WAC Series User's Guide
31