Update Ownindex And Hr - Polar Electro S725 User Manual

Interrupt the test
• You can stop the test any time during the test by pressing the stop button.
Failed TEST is displayed for a few seconds.
The latest OwnIndex and HR
If the wrist unit does not succeed in receiving your heart rate at the
beginning or during the test, the test will fail. Check that the transmitter
electrodes are wet and the elastic strap is snug enough.

Update OwnIndex and HR

You can update your OwnIndex and HR
User information. When you update these values regularly, the reading in
percentages of your maximum heart rate and calorie calculation give more
accurate individual information.
1. In the Time of day display scroll up or down until TEST is displayed.
2. Press OK to enter the Fitness Test mode.
3. Scroll up or down until Update USER SET is displayed. This display
appears if you have not updated your latest test results.
4. Press OK to update the OwnIndex and HR
5. To return to the Time of day display, press and hold the stop button.
Your maximum heart rate value is updated if the HR
-p are not replaced.
max
-p
max
-p values to the Options mode/
max
-p values.
max
E 85
-p is on.
max