Table of Contents
Advertisement
2.2.4 Power over Ethernet Powered Device
3~5 watts
6~12 watts
10~12 watts
3~60 watts
30~60 watts
Since each PoE port of 802.3bt PoE++ Managed Injector Hub supports 54V DC (UPOE-800G/
UPOE-1600G/UPOE-2400G) PoE power output, be sure that the powered device's acceptable DC
power is 54V DC (UPOE-800G/UPOE-1600G/UPOE-2400G); otherwise, it will damage the PD.
User's Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
Voice over IP phones
Enterprise can install PoE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices in the central area where UPS is
installed for un-interruptible power system and power control system.
Wireless LAN Access Points
Museums, sightseeing spots, airports, hotels, campuses, factories, and
warehouses can be installed with Access Points anywhere.
IP Surveillance
Enterprises, museums, campuses, hospitals and banks can be installed with
IP cameras without the limit of the installation location. Electrician is not
needed to install AC sockets.
PoE Splitter
PoE Splitter splits the PoE DC over the Ethernet cable into 5/12/19/24V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
High Power Speed Dome
This state-of-the-art design is considerable to fit in various network
environments like traffic centers, shopping malls, railway stations,
warehouses, airports, and production facilities for the most demanding
outdoor surveillance applications. Electrician is not needed to install AC
sockets.
26
Advertisement
Table of Contents
