Table of Contents
Advertisement
Distance
Metric
Interface
Uptime (hh:ss:mm)
State
Buttons
: Click to refresh the page
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Updates the table entries, starting from the first available entry. If the first entry of the table is displayed, the button
is disabled.
Updates the table entries, ending at the entry prior to the first entry currently displayed. If the first entry of the table
is displayed, the button is disabled.
Updates the table entries, starting from the entry next to the last entry currently displayed. If the last entry of the
table is displayed, the button is disabled.
Updates the table entries, ending at the last available entry. If the last entry of the table is displayed, the button is
disabled..
4.4.4 OSPF
Open Shortest Path First (OSPF)
algorithm and falls into the group of interior gateway protocols (IGPs), operating within a single autonomous system (AS).
4.4.4.1 Global Configuration
This is OSPF router configuration table. It is a general group to configure the OSPF common router parameters. The screen in
Figure 4-4-4-1
appears.
The distance of the route.
The metric of the route.
The interface where the ip packet is outgoing.
The time till the route is created. The unit is second.
Indicate if the destination network is reachable or not.
is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR)
Figure 4-4-4-1: OSPF Global Configuration Page Screenshot
User's Manual of GS-5220 LCD Series Managed Switch
250
Advertisement
Table of Contents
