Table of Contents
Advertisement
(B) Import file from TFTP Server to the Download Config and then load Download Config
to the Running Config.
Ex:
enable
configure
remotecfg login 172.16.100.181 get testcfg load
(C) Export: export file from Running config to the TFTP server.
Ex:
enable
configure
runningcfg login 172.16.100.181 put testcfg
(D) Save Running config to the Flash (partition 1 or partition 2).
Ex:
enable
configure
runningcfg write partition <number>
(E) Reload Flash data to the Running config
Ex:
enable
configure
runningcfg load partition <number>
(F) Set system configuration (current boot point) to factory default value
Ex:
enable
configure
restore-factory
(G) Select Configuration Flash Boot Point
Ex:
enable
configure
runningcfg active partition <number>
- 33 -
Advertisement
Table of Contents
