Table of Contents
Advertisement
5.4.73 remotecfg login
Description Login FTP server to get remote configuration and load it to running
Syntax remotecfg login <ipv4 address> get <filename> {load | write partition
Parameter
5.4.74 restore-factory
Description Restore factory setting (User needs to restart the system after
Syntax
Parameter
5.4.75 rmon alarm <index> alarm_interval
Description Set RMON alarm interval
Syntax rmon alarm <index> alarm_interval <number>
Parameter
configuration or write remote configuration to memory
<number>}
Name
<ipv4 address> IP address of TFTP server.
<filename>
<number>
restore-factory to make the setting take effect.)
restore-factory
None
Name
<index>
<number>
Description
Valid values: xxx.xxx.xxx.xxx (xxx:0~255)
Default value: -
Type: Mandatory
Remote path and file name (max 31
character)
Default value: -
Type: Mandatory
Partition number
Valid values: 1~2
Default value: -
Type: Mandatory
Description
RMON alarm entry index
Valid values: 1~64
Default value: -
Type: Mandatory
Alarm interval.
Valid values: 0~2147483647 (0: disable)
- 265 -
Advertisement
Table of Contents
