Planet IDL-2402 User Manual page 134

Quickly IP Assign
Quickly VID Assign
Assign
Select
IP Address
Query
Create
Delete
Binding Profile page = >
Label
Type the IGMP group IP address here for quick assignment. Click on Assign
button to put the value into the table. Then you can modify parts of the IP
addresses directly in the table.
Type the IGMP group IP address here for quick assignment. Click on Assign
button to put the value into the table.
Click on this button to apply the parameter values you have just entered. But
these values haven't been really saved in the database. You must click on
Create to save the values. Once the setting has been saved, you cannot
modify the values. You must delete the channel and then create again.
Click on this checkbox to select the channel you want to create, delete, or
assign values.
You can type the IGMP group address here and then click on Create button
to save. Valid values: 224.0.0.0 ~ 239.255.255.255. The range of addresses
from 224.0.0.0 to 224.0.0.255 is reserved for the use of routing protocols
and other low-level topology discovery or maintenance protocols.
Click on this button to display current channels in the profile.
Click on this button to create new channels (IGMP group address).
Click on this button to delete channel(s) (IGMP group address).
IGMP ACL Profile Binding
Click on these drop-down lists to select a line bridge port.
- 134 -
Description