Table of Contents
Advertisement
4.3.4.2 Forwarding Static
This option allows you to configure the static MAC address forwarding entries on a
specific bridge port. The setting of static MAC address takes effect on egress direction of
bridge port. From the Bridge menu, click on Forwarding and then Forwarding Static. The
following page is displayed.
Label
No. From...To...
Query
Delete
Source MAC
VID
Process
Create
Forwarding Static
Select the range of entry number in the FDB to be retrieved. Valid number
value: 1 ~ 512.
Click on this button to display the static MAC forwarding entries.
Delete the entries according to the entry number range you type in.
Click on these drop-down list to select a bridge port (ADSL bridge port or
GIGA bridge port) where the static forwarding entries to be configured.
Type in the MAC address for the static entry.
Type in the VID for the static entry (1 ~ 4094).
Click on the drop-down list and select "Deny" or "Pass".
"Pass" means to forward the packets with destination MAC address
matching one of the static forwarding MAC addresses to a specified output
bridge port.
"Deny" means to drop the packets.
Click on this button to create a new entry.
- 128 -
Description
Advertisement
Table of Contents
