Table of Contents
Advertisement
4.4.1.2 Service Channel Profile
This option allows you to configure the ADSL service channel profile. From the ADSL
menu, click on Profile and then Service Profile(Channel). The following page is displayed.
Label
Select Index
Index
L2 Packet
Direction
BitRate
DownShift Noise Margin (dB)/ Decrease net data rate if Noise Margin is below the Downshift Noise
ADSL Service Channel Profile setup
Click on the drop-down list and select the range of profile index. Options
are: 1~5, 6~10, ..., 116~120.
This field shows the profile index. Click on the radio button beside the
profile index to select the profile you want to modify.
Note that profile 1 (default) cannot be modified.
This is a threshold value that is the minimum packet size before the
system leaving the L2 low power state. Valid value is 0~32.
DS: downstream. US: upstream.
Min: Minimum bit rate during show time
Planned: Planned bit rate during setup
Max: Maximum bit rate during show time
L2 Min: Minimum bit rate during L2 low power state
- 143 -
Description
Advertisement
Table of Contents
