Specifications - Icom IC-A14IC-A14S Instruction Manual

10

SPECIFICATIONS

D General
• Frequency coverage
IC-A14 TX
RX
WX (Rx only)
IC-A14S TX/RX
• Mode
• Channel spacing
• Number of memory channels :
IC-A14
IC-A14S
• Power supply requirement
• Usable temperature range
• Current drain (at 7.4 V DC)
Tx
Rx at stand by
at AF max.
• Antenna connector
• Dimensions
(projections not included)
• Weight
(Without the battery pack and antenna.) (Without the battery pack and antenna.) (Without the battery pack and antenna.)
D Transmitter
Transmitter Transmitter
• Output power • Output power • Output power
• Modulation • Modulation • Modulation
• Modulation limiting
• Frequency stability
37
:
118.000 to 136.975 MHz
108.000 to 136.975 MHz
161.650 to 163.275 MHz
118.000 to 136.975 MHz
: 6K00A3E
16K0G3E (IC-A14/Rx only)
: 25 kHz
200 (20 CH × 10 BANKS)
100
: Specified Icom's battery packs
7.4 V DC standard
: –10˚C to +60˚C (+14°F to +140°F)
:
1.5 A
50 mA typical
500 mA
: BNC 50 Ω (nominal)
(nominal) (nominal)
: 53(W) × 120(H) × ×
120(H) 120(H) 36.9(D) mm 36.9(D) mm 36.9(D) mm
× × (H) × 1
2 3 3 32 3 ⁄ ⁄ (W) ⁄ ⁄ (W) (W) 4 4 23 23 23 23 23 23 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ (H) (H) 9 9 16 9 ⁄ ⁄ ⁄ ⁄ (D) inch
32 32 32 32 32 32 32 16
: Approx. 180 g (6.35 oz) : Approx. 180 g (6.35 oz) : Approx. 180 g (6.35 oz)
: 5.0 W (PEP) typical
1.5 W (CW)
: Low level modulation
: 70 to 100%
: ±5 ppm
• Audio harmonic distortion
• Hum and noise ratio
• Spurious emissions
• External MIC connector
D Receiver
• Receive system
• Intermediate frequencies • Intermediate frequencies • Intermediate frequencies
• Sensitivity • Sensitivity • Sensitivity
COM band COM band COM band
(6 dB S/N) (6 dB S/N) (6 dB S/N)
NAVI band NAVI band NAVI band
(6 dB S/N) (6 dB S/N) (6 dB S/N)
WX channels WX channels WX channels
(12 dB SINAD)
• Squelch sensitivity • Squelch sensitivity • Squelch sensitivity
(threshold)
• Selectivity
• Spurious response rejection
• Audio output power
(at 10% distortion with an 8 Ω
load, 30% mod.)
• Hum and noise
• External SP connector
All stated specifications are subject to change without notice or obligation. All stated specifications are subject to change without notice or obligation. All stated specifications are subject to change without notice or obligation.
: Less than 10% (at 60% mod.)
: More than 35 dB
: More than 46 dB
(except operating (except operating (except operating
frequency ±62.5 kHz range) frequency ±62.5 kHz range) frequency ±62.5 kHz range)
: 3-conductor 2.5(d) mm ( 3-conductor 2.5(d) mm ( 3-conductor 2.5(d) mm ( 1 1 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ˝)/
10 10 10 10 10
150 Ω
: Double conversion superhetero- Double conversion superhetero- Double conversion superhetero-
dyne dyne dyne
: 1st 46.35 MHz, 2nd 450 kHz
:
–6 dBµ typical
–3 dBµ typical
(IC-A14 only)
–13 dBµ typical
(IC-A14 only)
: AM Less than 0 dBµ
FM Less than –5 dBµ
(IC-A14 only)
: 6 dB (More than 7.5 kHz)
60 dB (Less than 25 kHz)
: AM More than 60 dB
FM More than 30 dB
(IC-A14 only)
: More than 700 mW
(internal SP)
More than 500 mW
(external SP)
: More than 35 dB at 30% mod.
⁄ ˝)/8 Ω
1
: 3-conductor 3.5 (d) mm ( ⁄ ⁄
8 8