Table of Contents
Advertisement
Cloning allows you to quickly and easily transfer the pro-
grammed data from one transceiver to another transceiver,
or, data from PC to a transceiver using the optional CS-A14
or, data from PC to a transceiver using the optional CS-A14
cloning software.
D Transceiver to transceiver cloning
q Connect the OPC-474
CLONING CABLE
of the master and sub transceivers.
• The master transceiver is used to send data to the sub trans-
ceiver.
Master
to the speaker
connector
OPC-474
w While pushing and holding [MR], rotate [VOL] to enter
While pushing and holding
While pushing and holding
cloning mode
(for operating the master transceiver only)
(for operating the master transceiver only)
(for operating the master transceiver only)
•
"CLONE" appears and the transceivers enter the clone standby
"CLONE" appears and the transceivers enter the clone standby
"CLONE" appears and the transceivers enter the clone standby
"CLONE" appears and the transceivers enter the clone standby
condition.
condition.
condition.
to [MIC/SP]
jack
jack
Sub
to the speaker
connector
[MR], rotate
[MR]
, rotate
.
CLONING
e Push [PTT] on the master transceiver.
on the master transceiver.
on the master transceiver.
• "CL.OUT" appears in the master transceiver's display.
• "CL.OUT" appears in the master transceiver's display.
• "CL.OUT" appears in the master transceiver's display.
• "CL.IN" appears automatically in the sub transceiver's display.
• "CL.IN" appears automatically in the sub transceiver's display.
• "CL.IN" appears automatically in the sub transceiver's display.
• "CL.IN" appears automatically in the sub transceiver's display.
• "CL.IN" appears automatically in the sub transceiver's display.
Master transceiver's
Master transceiver's
Master transceiver's
indication during clone
indication during clone
indication during clone
r When cloning is finished, turn power OFF, then ON again
r
When cloning is finished, turn power OFF, then ON again
When cloning is finished, turn power OFF, then ON again
to exit cloning mode.
NOTE:
Transceiver to transceiver cloning between
Transceiver to transceiver cloning between
IC-A14 and IC-A14S cannot be performed.
8
Sub transceiver's
indication during clone
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
34
Advertisement
Table of Contents
