Basic Operation; Setting A Frequency - Icom IC-A14IC-A14S Instruction Manual

n Setting a frequency
D Using [Y]/[Z] keys
q Rotate [VOL] to turn power ON, then push [CLR] to se-
lect the frequency mode when memory CH number or
WX CH number appears on the function display.
w Push [Y]/[Z] to set the desired frequency.
- For IC-A14 only -
• 1 MHz tuning step is available with the IC-A14; push
[FUNC] , then push [Y]/[Z]. Push [FUNC] again to re-
turn the normal tuning.
D Using keypad
(IC-A14 only)
q Rotate [VOL] to turn power ON, then push [CLR] to se-
lect the frequency mode when memory CH number or lect the frequency mode when memory CH number or lect the frequency mode when memory CH number or
WX CH number appears on the function display.
w Push 5 appropriate digit keys to input the frequency.
Push 5 appropriate digit keys to input the frequency. Push 5 appropriate digit keys to input the frequency.
• Push [1] as the 1st digit.
• When a wrong digit is input, push [CLR] to clear, then repeat
step w again.
• Push [ENT] to enter consecutive zero digits. to enter consecutive zero digits. to enter consecutive zero digits.
• Only [2], [5], [7] and [0] can be entered as the 5th and final [0] [0] can be entered as the 5th and final can be entered as the 5th and final
digit.
[EXAMPLE]
• 111.225 MHz: Push [1], [1], [1], [2], [2] [1] [1]
• 111.225 MHz: Push • 111.225 MHz: Push
• 117.250 MHz: Push [1], [1], [7], [2], [5]
• 117.250 MHz: Push • 117.250 MHz: Push
• 120.000 MHz: Push [1], [2], [ENT]
• 120.000 MHz: Push • 120.000 MHz: Push
• 125.300 MHz: Push [1], [2], [5], [3], [ENT]
• 125.300 MHz: Push • 125.300 MHz: Push
[CLR] [CLR] to clear, then repeat to clear, then repeat

BASIC OPERATION

[VOL]
[Y]
[ [ [Z] Z Z ] ]
[ENT] [ENT] [ENT]
3
[CLR]
Keypad
[FUNC]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
8