Table of Contents
Advertisement
3
BASIC OPERATION
n Side tone function
When using a headset
transceiver outputs your transmitted voice to the headset
for monitoring. Connect the optional headset with the trans-
ceiver when using this function
and headset are required)
D Setting the side tone level
q Push [PTT] to turn the transmit mode ON.
w During transmit, push [Y]/[Z] to adjust the level.
• 'ST--0' is OFF and 'ST--10' is maximum level.
[PTT]
[Z]/[Y]
WARNING! NEVER
WARNING! NEVER
WARNING! NEVER operate the transceiver with a head-
set at high volume/monitor levels for long period. A ring-
set at high volume/monitor levels for long period. A ring-
set at high volume/monitor levels for long period. A ring-
ing in your ears may occur. If so, reduce the volume
ing in your ears may occur. If so, reduce the volume
ing in your ears may occur. If so, reduce the volume
/monitor level or discontinue use.
11
(other manufacture's products)
(OPC-499 HEADSET ADAPTER
. (p. 39)
Side tone level is indicated
Side tone level is indicated
Side tone level is indicated
IMPORTANT!
IMPORTANT!
IMPORTANT!
Select 'ST--0' when a speaker
Select 'ST--0' when a speaker
Select 'ST--0' when a speaker
microphone is connected, oth-
microphone is connected, oth-
microphone is connected, oth-
erwise your voice will be heard
erwise your voice will be heard
erwise your voice will be heard
from the speaker during trans-
mit.
n LCD backlight
, the
The IC-A14/S has LCD backlight for convenience during
The IC-A14/S has LCD backlight for convenience during
The IC-A14/S has LCD backlight for convenience during
night time operation.
Push [LIGHT] to turn the LCD
backlight ON and OFF.
IMPORTANT!
Light OFF the LCD back-
Light OFF the LCD back-
Light OFF the LCD back-
Light OFF the LCD back-
Light OFF the LCD back-
light when no backlight is
light when no backlight is
light when no backlight is
light when no backlight is
light when no backlight is
necessary.
necessary.
necessary.
n Low battery indicator
Low battery indicator appears or blinks when the battery
Low battery indicator appears or blinks when the battery
power has decreased to a specified level. The attached bat-
tery pack requires recharging.
If no battery charging is performed even the low battery in-
dicator blinks, emits a long beep then the transceiver power
will be turned OFF automatically.
[LIGHT]
Appears when the battery
is nearly exhausted.
Blinks when the battery
recharging is necessary.
Advertisement
Table of Contents
