Table of Contents
Advertisement
n Key touch beep tone
The beep tone, which sounds at the push of a switch can be
set, if desired.
For IC-A14
Push [FUNC] then push [BEEP](8) to turn the key touch
beep tone ON and OFF.
• Key touch beep setting is displayed briefly.
For IC-A14S
q Rotate [VOL] to turn the transceiver power OFF.
w While pushing and holding [Y]/[Z], rotate [VOL] to enter
set mode.
e Push [MR] several times to select the key touch beep
item, "BEEP."
r Push [Y]/[Z] to select the desired condition from ON
to select the desired condition from ON
to select the desired condition from ON
and OFF.
t Push [CLR] to return to frequency mode.
OTHER FUNCTIONS
n ANL function
The ANL (Automatic Noise Limiter) function reduces noise
The ANL (Automatic Noise Limiter) function reduces noise
The ANL (Automatic Noise Limiter) function reduces noise
components such as that caused by engine ignition systems
components such as that caused by engine ignition systems
components such as that caused by engine ignition systems
while receiving.
For IC-A14
Push [FUNC] then push [ANL](1) to turn the ANL func-
tion ON/OFF.
• "ANL" indicator appears when the ANL function is ON.
• "ANL" indicator appears when the ANL function is ON.
• "ANL" indicator appears when the ANL function is ON.
• "ANL" indicator appears when the ANL function is ON.
• "ANL" indicator appears when the ANL function is ON.
"ANL" indicator appears when the ANL
"ANL" indicator appears when the ANL
"ANL" indicator appears when the ANL
function is in use.
For IC-A14S
q Rotate [VOL] to turn the transceiver power OFF.
w While pushing and holding [Y]/[Z], rotate [VOL] to enter
set mode.
e Push [MR] several times to select the ANL item, "ANL."
r Push [Y]/[Z] to select the desired condition from ON
and OFF.
• "ANL" indicator appears when the ANL function is ON.
t Push [CLR] to return to frequency mode.
[ANL](1)
[ANL](1)
to turn the ANL func-
to turn the ANL func-
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
22
Advertisement
Table of Contents
