Table of Contents
Advertisement
6
OTHER FUNCTIONS
n Set mode setting
Set mode is used for programming infrequently changed val-
ues or conditions of functions.
D Entering set mode
q Rotate [VOL] to turn the
transceiver power OFF.
w While pushing and holding
[Y] and [Z], turn [VOL] to
enter set mode.
e Push [MR] several times
to select the desired set
mode item.
r Push [Y]/ [Z] to select the
desired condition or value
for the item.
t Push [CLR] to return to
frequency mode.
For IC-A14 only
Push [FUNC] then push and hold [SET](ENT) for 1 sec. to
then push and hold
then push and hold
also enters into set mode.
also enters into set mode.
also enters into set mode.
For your information:
For your information:
For your information:
The default value of the set mode items can be changed
The default value of the set mode items can be changed
The default value of the set mode items can be changed
with the optional cloning software, CS-A14. And the de-
with the optional cloning software, CS-A14. And the de-
with the optional cloning software, CS-A14. And the de-
fault settings are re-called by the home function.
fault settings are re-called by the home function.
fault settings are re-called by the home function.
25
[VOL]
[Y]
[MR]
[Z]
[CLR]
[CLR]
[CLR]
[SET](ENT)
[SET](ENT)
D Set mode items
• ANL— ANL function
(available with IC-A14S only)
(available with IC-A14S only)
(available with IC-A14S only)
Sets the ANL
(Automatic Noise Limiter)
(Automatic Noise Limiter)
(Automatic Noise Limiter)
noise components such as that caused by engine ignition
noise components such as that caused by engine ignition
noise components such as that caused by engine ignition
systems while receiving.
• BEEP— Key touch beep
• BEEP— Key touch beep
• BEEP— Key touch beep
The beep tone which sounds at the push of a switch can be
The beep tone which sounds at the push of a switch can be
The beep tone which sounds at the push of a switch can be
set, if desired.
set, if desired.
set, if desired.
• MIC— Microphone gain
The internal microphone gain can be selected to suits your
communicating style.
"H"
, "M"
(High gain)
(Middle gain)
are available.
function that reduces
function that reduces
function that reduces
(available with IC-A14S only)
and "L"
selections
(Low gain)
Advertisement
Table of Contents
