Table of Contents
Advertisement
D Alkaline cells installation
Install 6 AA (LR6) size alkaline cells as described below.
q Release the latch, and open the cover.
CAUTION:
NEVER use your finger nail when releasing the latch.
use your finger nail when releasing the latch.
use your finger nail when releasing the latch.
Because the latch is tightly locked— you may injure your-
Because the latch is tightly locked— you may injure your-
Because the latch is tightly locked— you may injure your-
self. Instead, use something relatively flat, like the edge
self. Instead, use something relatively flat, like the edge
self. Instead, use something relatively flat, like the edge
of a coin or the tip of a screwdriver, to carefully release
of a coin or the tip of a screwdriver, to carefully release
of a coin or the tip of a screwdriver, to carefully release
the latch.
w Install 6 AA (LR6) size alkaline cells.
Latch
e
e
e Attach the cover, then close. And lock the latch until it
BATTERY PACKS AND CASE
• Install the conventional alkaline cells only.
• Be sure to observe the correct polarity.
Attach the cover, then close. And lock the latch until it
Attach the cover, then close. And lock the latch until it
makes a 'click' sound.
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new
and old batteries together.
• Keep battery contacts clean. It's a good idea to clean
battery terminals once a week.
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
32
Advertisement
Table of Contents
