Specifications - Icom IC-A16 Service Manual

Vhf air band transceivers
Hide thumbs Also See for IC-A16:
Table of Contents

Advertisement

SECTION 1
M General
• Frequency coverage:
• Channel spacing:
• Type of emission:
• Number of memory channels:
• Antenna impedance:
• Antenna connector:
• Operating temperature range:
• Power supply voltage:
• Current drain:
• Dimensions (projections not included):
• Weight (approximate):
M Transmitter
• Output power (at 7.2 V DC):
• Modulation system:
• Modulation limiting ([USA] only):
• Modulation depth ([EUR] only):
• Audio harmonic distortion:
• Ham and noise ratio ([USA] only):
• Spurious emissions:
• Frequency stability:
• Microphone impedance:

SPECIFICATIONS

[USA]
TX
RX
[EUR] TX/RX
25 kHz/8.33 kHz
[USA]
6K00A3E/5K60A3E
16K0G3E (WX, receive only)
[EUR] 6K80A3E/5K00A3E
200 channels maximum
50 Ω
BNC type
[USA] −10ºC ~ +60ºC (14ºF ~ 140ºF)
[EUR] −20ºC ~ +55ºC
Specified Icom's battery packs only
(7.2 V DC negative ground)
Transmitting
Receiving
52.2 (W)×111.8 (H)×34.1 (D) mm
(2.1 (W)×4.4 (H)×1.3 (D) inches, with BP-280)
150 g (5.3 oz, transceiver only)
6.0 W (PEP)
1.8 W (Carrier Wave)
Low level modulations
70 ~ 100%
85%
[USA]
Less than 10% (at 60% modulation)
[EUR] Less than 10% (at 85% modulation input level +3 dB)
More than 35 dB (at 70% modulation)
[USA]
More than 46 dB
( Except ±62.5 kHz from the operating frequency, in the AM
mode, and ±20.825 kHz, in the AM narrow mode.)
[EUR] −36 dBm for harmonics (30 MHz to 1 GHz)
−46 dBm for non-harmonic spurious
( 30 MHz to 1 GHz, except ±1 MHz from the operating
frequency.)
[USA]
±0.4 kHz
[EUR] ±1 ppm
150 Ω (External microphone)
1-1
118.000 ~ 136.99166 MHz
118.000 ~ 136.99166 MHz
108.000 ~ 117.975 MHz (NAV)
161.650 ~ 163.275 MHz (WX)
118.000 ~ 136.99166 MHz
1.8 A maximum
650 mA maximum (maximum audio)
65 mA typical (stand-by)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-a16e

Table of Contents