Setting Up The Hardware Environment - Planet GRT-101 User Manual

PLANET Technology Corp.
Power
r
Adapte
Figure 2-2 Direct Connection with PC or NB
Server
HUB/Switch
Power
Figure 2-4 Connection with Switch or HUB

2.4 Setting up the hardware environment

Step 1: Connect the power adapter to the port labeled DC-IN on the rear
panel of the product.
Step 2: Connect the Ethernet cable.
If GRT-101 is directly connected to PC, the Ethernet cable has to be
used cross over one (refer to figure 2-3). If the product is connected
to hub or switch, be sure that the hub or switch supporting
PC
RJ-45
cable
File Server
Workstation
RJ-45 cable
GRT-101/401 User's Manual
NB
DB-9
Cable
PC
DB-9
- - 6
Wall Jack
NB
Mobile
Device
Wireless LAN
Wall Jack