User Profile - Planet GRT-101 User Manual

PLANET Technology Corp.
Flag Destination /
---- ------------------------------------------ ------------ ---------
S 0.0.0.0/
C 200.0.8.0/ 255.255.255.0/ directly
C 192.168.0.0/ 255.255.255.0/ directly
C 127.0.0.1/255.255.255.255/ directly

3.14 User Profile

GRT-101/GRT-401 comes pre-configured with user profile 1 already
established, that is, user "admin" with password of "admin" and menu driven
user interface. The maximum number of user profiles is limited to 5. You can
add, delete, modify, or list the user profiles with the commands in the following
examples.
To change anyone of the user name and password, you must provide both
items together. For example, to change the password only to "76gu94t" for
user profile 1 (default user name "admin"), enter:
admin# admin user modify 1 profile admin 76gu94t
For user profile 1 with password "76gu94t", to change the username to "titan"
type:
admin# admin user modify 1 profile titan 76gu94t
Certainly, you can change both user name and password in one command line.
The maximum length of user name and password is limited to 19.
To set the user interface for an existing user profile, e.g., user profile 1, use
"modify" and "attrib" commands:
admin# admin user modify 1 attrib command
The following commands add a new user profile 2 "test" with password
"83fdi7s", and set the user interface to menu mode:
admin# admin user modify 2 attrib menu
admin# admin user modify 2 profile test 83fdi7s
Note: You must perform the above procedure in the sequence as shown.
To show all user profiles with attributes, type:
admin# admin user list
Netmask / Gateway
0.0.0.0/ 200.0.8.254
- - 61
GRT-101/401 User's Manual
Interface Portname
200.0.8.1
200.0.8.1 WAN1
192.168.0.218
127.0.0.1 Loopback
WAN1
LAN