Hardware Installation - Planet POE-151S User Manual

5. Hardware Installation

This section describes the hardware features of PoE Splitter. Before
connecting any network device to the PoE Splitter, refer to this
chapter carefully.
5.1 Before Installation
The PLANET PoE Splitter separates the power out and provides two
kind of DC power output through its DIP switch and its voltage and
current shown as below:
Model
POE-151S
5V DC / 2A
12V DC / 1A
POE-152S
12V DC / 2A
POE-162S
24V DC / 1A
POE-151S / POE-152S
Ethernet 5V
The PLANET PoE Splitter and PLANET PoE Injector (ex.
POE-151, POE-152 and POE-161) can be installed in
pair. Use of third-party PoE Injector device is allowed if
the device complied with IEEE 802.3at or IEEE 802.3af
Note
standard.
DIP switch for DC Voltage Output
12V DC OUT
POE-162S
CAUTION
Incorrect voltage might
cause device damage
DC Out 24V 12V
Default Mode
5V DC
12V DC
Ethernet
1-3