Hardware Installation; Hardware Description; Olt Front Panel - Planet EPL-2000 User Manual

2-port gepon managed olt

Hide thumbs Also See for EPL-2000:

Table of Contents

This section describes the hardware features and installation of the GEPON OLT on the desktop or rack mount. For easier

management and control of the GEPON OLT, familiarize yourself with its display indicators and ports. Front panel illustrations in

this chapter display the unit LED indicators. Before connecting any network device to the GEPON OLT, please read this chapter

completely.

The unit front panel provides a simple interface monitoring the OLT.

EPL-2000 Front Panel

■ RS-485 and RJ45 Console Connector

This is just for Manufacturer Technical Use

■ Reset Button

The reset button is designed for rebooting the GEPON OLT without turning off and on the power. The following is the

summary table of reset button

Reset Button Pressed and Released

System reboot

■ Management Port

10/100BASE-TX Copper, RJ45 Twisted-[pair: Up to 100 meters

■ Gigabit SFP Uplink Slots

1000BASE-SX/LX mini-GBIC slot, SFP (Small Form Factor Pluggable) transceiver module: From 550 meters (multi-mode

fiber), up to 10/30/50/70/120 kilometers (single-mode fiber).

GE1 & GE2 Gigabit SFP uplink slots support 1000Mbps Forced Mode only. The remote

Gigabit switch or media converter's SFP port must support 1000Mbps Forced Mode as well.

2. HARDWARE INSTALLATION

Figure 2-1 EPL-2000 Front Panel

functions:

Function

Reboot the GEPON OLT

Figure 2-1

shows the front panel of the GEPON OLT.

User's Manual of EPL-2000

Table of Contents