FUTABA T8J-2.4G Instruction Manual page 8

RECEIVER: R2008SB
used with conventional system servos, etc. in addition to S.BUS system compatible servos and gyros, etc.
LED
Link switch
Antenna
SERVOS
servos.
Your 8J system includes the following components:
T8J Transmitter
R2008SB Receiver
* The set contents depend on the type of set.
Transmitter T8J
(2-stick, 8-channel, S-FHSS system, Built-in
Dual Antenna Diversity)
Transmitting frequency: 2.4GHz band
Power supply: 4-AA 1.2V Dry Cell batteries; 4.8V
total (sold separately)
or HT5F1700B Ni-MH battery (option)
or FT2F2100B Li-Fe battery (option)
R2008SB
CONTENTS AND TECHNICAL SPECIFICATIONS
(Connectors)
Channel 1
Channel 7
for conventional
system
S.BUS Port
Channel 8 output
for conventional
system
/Battery terminal
Receiver R2008SB
(Dual Antenna Diversity)
Power requirement: 4.8V to 7.4V battery or regulated
output from ESC, etc.
Size: 0.98 x 1.69 x 0.55 in. (24.9 x 42.8 x 14.0 mm)
Weight: 0.34 oz. (9.5g)
(*1)
Be sure that when using ESC's regulated output
the capacity of the ESC must meet your usage
condition.
8
output
output
(*1)