Siemens SIMATIC ET 200SP Manual page 48

Technical specifications
Article number
Number of analog inputs
permissible input current for current input (de‐
struction limit), max.
Input ranges (rated values), currents
● 0 to 20 mA
● Input resistance (0 to 20 mA)
● 4 mA to 20 mA
● Input resistance (4 mA to 20 mA)
Analog value generation for the inputs
Measurement principle
Integration and conversion time/resolution per
channel
● Resolution with overrange (bit including
● Integration time, parameterizable
Smoothing of measured values
● parameterizable
Encoder
Connection of signal encoders
● for current measurement as 2-wire
Connectable encoders
● 2-wire sensor
Errors/accuracies
Linearity error (relative to input range), (+/-)
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min.
Repeat accuracy in steady state at 25 °C (rela‐
tive to input range), (+/-)
Operational error limit in overall temperature range
● Current, relative to input range, (+/-)
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-)
Interrupts/diagnostics/status information
Diagnostics function
Substitute values connectable
Alarms
● Diagnostic alarm
● Limit value alarm
Diagnostic messages
48
sign), max.
transducer
– permissible quiescent current (2-wire
sensor), max.
Input/output module AI-DI 16/DQ16x24VDC HART HA (6DL1133-6EW00-0PH1)
6DL1133-6EW00-0PH1
16
30 mA
Yes; 16 bit incl. sign
250 Ω
Yes; 16 bit incl. sign
250 Ω
integrating (Sigma-Delta)
16 bit; Resolution with overrange (bit including
sign), max. 16 bits, exception: 15 bits at 60 Hz in‐
terference suppression and 0 to 10 mA
Yes; channel by channel
Yes; none, weak, medium, strong, channel-by-
channel
Yes
Yes
1.5 mA
0.01 %
60 dB
0.05 %
0.5 %
0.1 %
Yes
Yes
Yes
Yes; two upper and two lower limit values in each
case
Manual, 05/2017, A5E39294170-AA