Siemens SIMATIC ET 200SP Manual page 47

Article number
for standard inputs
Cable length
● shielded, max.
● unshielded, max.
Digital outputs
Number of digital outputs
Current-sinking
Current-sourcing
Short-circuit protection
● Response threshold, typ.
Open-circuit detection
Overload protection
Limitation of inductive shutdown voltage to
Controlling a digital input
Switching capacity of the outputs
● with resistive load, max.
● on lamp load, max.
Load resistance range
● lower limit
● upper limit
Output current
● for signal "1" rated value
● for signal "0" residual current, max.
Output delay with resistive load
● "0" to "1", typ.
● "1" to "0", typ.
Parallel switching of two outputs
● for uprating
● for redundant control of a load
Switching frequency
● with resistive load, max.
● with inductive load, max.
● on lamp load, max.
Total current of the outputs
● Current per channel, max.
● Current per module, max.
Cable length
● shielded, max.
● unshielded, max.
Analog inputs
Input/output module AI-DI 16/DQ16x24VDC HART HA (6DL1133-6EW00-0PH1)
Manual, 05/2017, A5E39294170-AA
– parameterizable
Technical specifications
6DL1133-6EW00-0PH1
Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
(in each case + delay of 30 to 500 µs, depending
on line length)
1 000 m
600 m
16
No
Yes
Yes
0.7 to 1.3 A
Yes
Yes
L+ -(37 to 41V)
Yes
0.5 A
5 W
48 Ω
12 kΩ
0.5 A
0.7 mA
50 µs
100 µs
No
Yes
100 Hz
2 Hz
10 Hz
0.5 A
2 A
1 000 m
600 m
47