DSX CableAnalyzer
Users Manual
Verify Operation
The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to "If the Tester Does Not
Operate as Usual" on page 76.
Clean the Tester
To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with water or water and a mild detergent.
To clean the case, use a soft cloth that is moist with water or
water and a mild detergent.
Do not put the tester or the battery pack in water.
To prevent damage to the touchscreen or the case,
do not use solvents or abrasive materials.
When you clean the touchscreen or the case, do not
let liquid get under the plastic around the
touchscreen.
Traceable Calibration Period
To make sure that the modules operate within the published
specifications for accuracy, have them calibrated at a Fluke
Networks authorized service center every 12 months.
See Information About the Tester
To see information about your tester and attached modules and
adapters
On the home screen, tap the TOOLS icon, then tap Version
Information.
70
riešenia na presné meranie
Warning
Caution