Upload Results To A Pc - Fluke DSX 5000 CableAnalyzer User Manual

Cable IDs are case-sensitive. For example, the
tester saves result with the names "A0" and "a0"
in two different records.
If you select the active project, the EXPORT RESULTS screen
shows the percentage of tests completed for the project and
the percentage of results already exported to a flash drive.

Import: On the IMPORT RESULTS screen select the project
that contains the results you want to import from the
flash drive, then tap IMPORT.

Delete: On the DELETE RESULTS screen select the project
that contains the results you want to delete on the flash
drive, then tap DELETE.

Upload Results to a PC

To upload results to a PC from the tester or a flash drive, use
LinkWare software.
1 Install the latest version of LinkWare software on the PC.
2 Turn on the tester and start LinkWare on the PC.
3 Use the USB cable supplied to connect the Micro-AB USB port
on the tester to a type A USB port on the PC. See Figure 23.
Or connect a USB flash drive to the PC.
4 On the LinkWare toolbar, click
CableAnalyzer to upload from a tester, or Test Files (.tst) to
upload from a flash drive.
5 In the Import dialog box in LinkWare, select options for the
location and the number of results to import.
riešenia na presné meranie
Note
Chapter 3: Test Results
Upload Results to a PC
, then select DSX
55